Evolution 2G to 3G

Evolution from 2G to 3G
2G networks were built mainly for voice data and slow transmission. Due to rapid changes in user expectation, they do not meet today's wireless needs.Cellular mobile telecommunications networks are being upgraded to use 3G technologies from 1999 to 2010. Japan was the first country to introduce 3G nationally, and in Japan the transition to 3G was largely completed in 2006. Korea then adopted 3G Networks soon after and the transition was made as early as 2004
From 2G to 2.5G (GPRS)
"2.5G" (and even 2.75G) are technologies such as i-mode data services, camera phones, high-speed circuit-switched data (HSCSD) and General packet radio service (GPRS) that provide some functionality domains like 3G networks, but without the full transition to 3G network. They were built to introduce the possibilities of wireless application technology to the end consumers, and so increase demand for 3G services.
When converting a GSM network to a UMTS network, the first new technology is General Packet Radio Service (GPRS). It is the trigger to 3G services. The network connection is always on, so the subscriber is online all the time. From the operator's point of view, it is important that GPRS investments are re-used when going to UMTS. Also capitalizing on GPRS business experience is very important.
From GPRS, operators could change the network directly to UMTS, or invest in an EDGE system. One advantage of EDGE over UMTS is that it requires no new licenses. The frequencies are also re-used and no new antennas are needed.
Migrating from GPRS to UMTS
From GPRS network, the following network elements can be reused:
Home location register (HLR)
Visitor location register (VLR)
Equipment identity register (EIR)
Mobile switching centre (MSC) (vendor dependent)
Authentication centre (AUC)
Serving GPRS Support Node (SGSN) (vendor dependent)
Gateway GPRS Support Node (GGSN)
From Global Service for Mobile (GSM) communication radio network, the following elements cannot be reused
Base station controller (BSC)
Base transceiver station (BTS)
They can remain in the network and be used in dual network operation where 2G and 3G networks co-exist while network migration and new 3G terminals become available for use in the network.
The UMTS network introduces new network elements that function as specified by 3GPP:
Node B (base station)
Radio Network Controller (RNC)
Media Gateway (MGW)
The functionality of MSC and SGSN changes when going to UMTS. In a GSM system the MSC handles all the circuit switched operations like connecting A- and B-subscriber through the network. SGSN handles all the packet switched operations and transfers all the data in the network. In UMTS the Media gateway (MGW) take care of all data transfer in both circuit and packet switched networks. MSC and SGSN control MGW operations. The nodes are renamed to MSC-server and GSN-server.